ROYAL RANGE STABLE BLOCKS
The Royal range is manufactured to the same high standard as our Prime range, but with the addition of our most popular extras, including: clear roof sheets in each stable, matching black ridge, hook and band hinges, 2-pane hopper windows, 1.2m overhang, plywood overhang lining, top door frame protection and gable end vents. (Support posts can be added as an optional extra.)
The Royal range is an extremely striking range of stables – it is challenging our Prime range to become our most popular range.
Below we have a selection of Royal range stable blocks for you to view. Some have been adapted to suit the requirements of our clients and this includes; extended overhangs, grills, additional door protection and alternative roofing.
As with all of our timber buildings, we can create a stable block to suit your specific requirements.
Made to Order | Bespoke Designs | Professional Installation
A Selection Of Our Royal Range Stable Blocks
;)
;)
;)
;)
;)
;)
Royal Range Stables Specification
Shiplap Cladding
Top grade redwood shiplap cladding 16mm x 150mm, fixed with 50mm sheradised ring shank nails.
Framework
The frameworks are manufactured with kiln dried timber, 47mm x 75mm. All timber is regularised and strength graded for structural use to C16-C24.
Kickboarding
All stables are kickboarded as standard to a height of 1.2m high with exterior grade 12mm WISA Spruce plywood – multiple 5 layered, for structural integrity.
Roof
Black Onduline roof with matching ridge. Also available in green, brown or red. Each stable includes a clear roof sheet. Standard roof pitch is 20 degrees. Purlins 100mm x 47mm, 125mm x 47mm, 100mm x 100mm. Fitted to Onduline specification.
Guttering
100mm half round black guttering with 50mm round downpipes are fitted as standard to the front of all buildings. Back guttering is available.
Windows
One 2-pane hopper window with heavy duty mesh is fitted to the front of each stable and to the rear of corner boxes, 0.78m wide x 1.04m high.
Doors
Doors are manufactured from 125mm x 25mm tongue, groove and v-jointed timber, ledged and braced. Both top and bottom doors are lined with exterior grade plywood to give an overall thickness of 50mm. Stable door size 1.1m wide x 2.1 high. Top door 0.8m high. Bottom door height 1.3m. Bottom doors are furnished with 1 x strong anti-chew strip, 1 x heavy duty kick-over latch and 1 x 225mm brenton bolt, 1 x 150mm cabin hook and 1 pair of 600mm heavy hook & band hinges. Top doors have 1 x 100mm oval pad bolt, 1 x 150mm cabin hook, 1 pair of 600mm heavy hook & band hinges. Top door frame protection included. All door furniture is fully galvanised.
Preservative
Buildings are treated with an animal friendly preservative product to a golden brown finish before leaving our workshop.
All buildings are 2.2m to the eaves and approximately 3.2m to the ridge, when erected on one course of bricks. Overhang at 1.2m deep, lined with plywood. Back and end panels come with a weather prevention DPC skirt to eliminate water penetrating the base of the walls. All internal roof trusses are open to aid ventilation except when sited next to a tack/feed room. In this instance they are fully boarded to ensure security is maintained. Tack rooms are lined to eaves with exterior grade 9mm Spruce plywood. One gable end vent included at each end.
Contact Us Today
Get in touch today to discuss your requirements. Don’t see a design that you like? Don’t worry; we are proud to offer bespoke design services to all of our clients. So, if you have any specific requirements in mind, please do not hesitate to get in touch. We would be more than happy to advise you and answer your questions. Call us today!
What our Clients are saying…
Of course, it is easy for us to promote our barns by saying how great they are, but what you need is real proof. That’s why we provide real testimonials from real clients, so you can get an idea of what people are saying about us. If you are impressed by what you see, why not get in touch today?
